Drilling alignment check_X-3000
Light pipe type：Closed
Stage：1000*800mm
Function application：PCB drilling alignment inspection
Feeding method：Manual sample feed
X-3000 is mainly used for PCB board drilling alignment check. Its high gain, high sensitivity, high spatial resolution, and short response time are well received by customers.
specification
Product Introduction
| Model： | X-3000 |
| X-Ray tube type | Closed |
| Spatial resolutiaon | 52lp/mm |
| Light tube voltage | 50KV |
| Light tube current | 1000uA |
| Magnification | 15-30 Times |
| Largest window | Φ25mm |
| Detection area | 1000mm*800mm |
| Maximum PCB width | 1050mm |
| way to control | Manual feeding plate |
| Focus size | 100um |
| Output screen brightness | 30cd/cm2 |
| Image speed | 60 FPS/S |
| Maximum spacing | 280mm |
| Machine size | 1514*838*1050mm (L*W*H) |
| Machine weight | 360KG |
| operating system | WINDOWS 7/WINDOWS 10 |
| Power supply/power | AC110-220V 50-60HZ 1200W |
| Radiation safety test | <1 uSV/H |
XC-3100 is a new type of X-ray spotting machine, used to quickly count the reel materials in the SMT industry, with an accuracy of 99.99% and a four-reel inspection speed of only 7-14S.
X-7100 X-RAY has a wide range of inspection fields and is usually used in the internal structure inspection of electronic components. Common bubble void rate measurement, circuit short circuit and open circuit, solder joint lack of solder, less solder leakage, and foreign body cracks inside.....
X-9200's large-size stage (1700*1000mm) can accommodate a variety of large-size samples for X-RAY testing. Its feature of being suitable for large-volume automatic testing is deeply loved by customers and is widely used in LED hard light bar testing.